init

include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

platformio.ini

@@ -0,0 +1,58 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:ATmega88P]
+platform = atmelavr
+board = ATmega88P
+framework = arduino
+board_build.f_cpu = 1000000L
+lib_deps = fastled/FastLED@^3.6.0
+
+[env:program_via_DiamexISP]
+board = ATmega88P
+framework = arduino
+platform = atmelavr
+upload_protocol = avrispv2
+upload_port = COM10
+upload_speed = 19200
+upload_flags = 
+	-c avrispv2
+	-p
+	$BOARD_MCU
+	-P
+	$UPLOAD_PORT
+	-b
+	$UPLOAD_SPEED
+	-c avrispv2
+upload_command = avrdude -p atmega88p -P COM10 -b 19200 -c stk500v2 -U flash:w:.pio\build\program_via_DiamexISP\firmware.hex:i
+lib_deps = fastled/FastLED@^3.6.0
+
+[env:attiny261]
+board = ATmega88P
+framework = arduino
+platform = atmelavr
+upload_protocol = arduino
+upload_speed = 115200
+board_build.f_cpu = 8000000L
+upload_port = COM10
+board_fuses.lfuse = 0xE2
+board_fuses.hfuse = 0xD9
+board_fuses.efuse = 0xFF
+upload_flags = 
+	-C
+	$PROJECT_PACKAGES_DIR/tool-avrdude/avrdude.conf
+	-p
+	$BOARD_MCU
+	-P
+	$UPLOAD_PORT
+	-c
+	stk500v2
+upload_command = avrdude -B 115200 $UPLOAD_FLAGS -U flash:w:$SOURCE:i
+lib_deps = fastled/FastLED@^3.6.0

src/main.cpp

@@ -0,0 +1,143 @@
+#include <Arduino.h>
+#include <FastLED.h>
+
+#define HEATER PD3
+#define TEMP A0
+#define TARGETTEMP PC1
+#define LED_PIN PD5 
+#define LED_TYPE WS2812B
+#define BRIGHTNESS 30
+#define COLOR_ORDER RGB
+#define NUM_LEDS 1
+#define DUMMYPIN PD2
+
+
+CRGB leds[NUM_LEDS];
+int curState = 0;
+int stepSize = 30;
+uint16_t temp = 20;
+uint16_t targetTemp;
+
+uint8_t ctrPeriod = 0;
+
+// power cycles / 1s
+uint8_t ctrStopPower = 0; 
+
+bool wsp80 = false;
+
+unsigned int getTargetTemp();
+unsigned int getTemp();
+
+void setup() {
+
+	// Serial.begin(1200);
+	
+	pinMode(HEATER, OUTPUT);
+	pinMode(PD5, OUTPUT);
+	pinMode(DUMMYPIN, INPUT);
+
+	delay(1000);
+	LEDS.addLeds<LED_TYPE, LED_PIN, COLOR_ORDER>(leds, NUM_LEDS);
+	FastLED.setBrightness(BRIGHTNESS);
+	FastLED.clear();
+	FastLED.show();
+
+	if(getTemp() > 500){
+		leds[0] = CRGB(0, 255, 0);
+		FastLED.show();
+	}
+	else{
+		wsp80 = true;
+	}
+
+}
+
+unsigned int getTargetTemp(){
+	float m = 0.354;
+	float b = 115.289;
+	return int(analogRead(TARGETTEMP)*m+b);
+}
+
+unsigned int getTemp(){
+	float ua = 5*(float)analogRead(TEMP)/1024;
+	float t = (1020*ua-1100)*20000 / (77*(1100-20*ua));
+	return (unsigned int)t;
+}
+
+
+
+
+void loop() {
+
+	// ################### wsp80 mode #####################
+	// logic part repeats with 1 second
+	if(millis() % 1000 == 0 && wsp80){
+		ctrPeriod = 0;
+		// check temp of heater
+		temp = getTemp();
+		targetTemp = getTargetTemp();
+
+		Serial.print("Temp: ");
+		Serial.print(temp);
+		Serial.print(";Zieltemperatur: ");
+		Serial.print(targetTemp);
+		
+
+		if(targetTemp > temp + 50){
+			// full power
+			ctrStopPower = 50;
+		}
+		else if (targetTemp > temp + 20){
+			// 1 / 3 of power
+			ctrStopPower = 16;
+		}
+		else if (targetTemp > temp + 5){
+			// 1 / 10 of power
+			ctrStopPower = 5;
+		}
+		else if (targetTemp < temp){
+			// heater off!!!
+			ctrStopPower = 0;
+		}
+
+
+
+		stepSize = int(float(temp) / float(targetTemp) * 255.0);
+		if (stepSize > 255){
+			stepSize = 255;
+		}
+
+		leds[0] = CRGB(0+stepSize, 0, 255-stepSize);
+		FastLED.show();
+
+		curState += stepSize;
+	}
+
+	if(millis() % 20 == 0 && wsp80){
+		if(ctrPeriod < ctrStopPower){
+			// turn heater on
+			digitalWrite(HEATER, true);
+		}
+		else{
+			// turn heater off
+			digitalWrite(HEATER, false);
+		}
+	}
+
+	// ############### ws80 #################
+	if(millis() % 1000 == 0 && !wsp80){
+		ctrPeriod = 0;
+		targetTemp = getTargetTemp();
+		float m = 0.833;
+		float b = 12.5;
+		ctrStopPower = uint8_t(m * targetTemp + b);
+	}
+	if (millis() % 20 == 0 && !wsp80){
+		if(ctrPeriod < ctrStopPower){
+			digitalWrite(HEATER, true);
+		}
+		else{
+			digitalWrite(HEATER, false);
+		}
+	}
+}

test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Test Runner and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html